Exhausts

Standard Exhaust System Replacement

Your vehicle’s exhaust system has a critical role to play in the efficient operation of your vehicle and for the safety of you and your family.
The exhaust removes hot poisonous gases produced by your engine, keeping these gases away from your vehicle and its occupants,
converting them into more environmentally friendly outputs.
It also reduces engine noise to acceptable and legal levels, and Improves your engine’s performance and fuel economy.

We have a large range of suppliers that can supply direct bolt on replacement exhaust systems for your vehicle to assure
you of quality fitment and hassle free driving.
We use quality Australian made exhaust systems at our Tweed Heads location, and are able to offer a lifetime warranty.
Please refer to our Lifetime Warranty section for more details.
Please read our Performance Exhaust Replacement section below to see if your vehicle could benefit from
a performance exhaust upgrade for more power and fuel economy.

Performance Exhaust Replacement

We have a large range of bolt on performance exhaust systems for most cars, utes and four wheel drive. These systems have been specially manufactured for maximum performance gain, superior design and with the ultimate sound and depending on your driving style improved economy. All our performance systems are mandrel bent to allow perfect flow through the bends without restriction compared to pipes bent using a normal exhaust pipe bender. All our systems have been tested to the highest standard to deliver the best quality and outcome for your vehicle.

Some of the leading brands of exhaust systems we use are Cobra Performance, Redback, Redback 4×4, Xforce, Rage, Mercury. We also have a large selection of header brands we use such as HiTech, Genie, Pacemaker, HM Headers and Redback for a totally tuned exhaust system. With this selection of leading brands we can offer you a choice of systems from mild steel, stainless steel, dual or single exhaust systems or a complete custom built system if a bolt on system is not available.

SS Induction

We can supply the full range of SS Induction products for your vehicle. The induction systems work due to cold air being denser than warm humid air and holds more oxygen. This cooler oxygen-rich air, increases the efficiency of the combustion process creating more power and torque.

All vehicles have a factory induction however most are undersized, restrictive and poorly situated so that there is no ramming effect and your engine is left to breathe in hot turbulent air from within the engine bay. This results in sluggish responsiveness with poor performance and economy – it’s like trying to run down the road breathing through a straw in your mouth.

You drive into high-pressure air try putting your arm out the window at even 50kph. SS Inductions’ cold air systems channel that pressured air to allow the engine to breathe in a greater volume at all speeds, across the rev range. The ECU in your vehicle will detect the increased air and alter its settings accordingly. This may take up to several hundred kilometres of normal driving to fully adjust and produce the maximum effect. With the exception of the OTR Growler® no tune is required when fitting any SS Inductions’ products.

This increase in airflow not only improves power, torque and general performance but also improves fuel economy by obtaining more power from the fuel air mixture you’re burning, you in turn use less fuel when driving your car from point A to point B at highway speeds.

So why fit an SS Inductions’ system?

-Improved power

-Increased torque

-Better fuel economy

-Sharper acceleration

-Factory appearance

-Less heat soak

-High flow rate

-Re-washable filter

-Smoother overall performance-Simple installation

-No need for an expensive tune* except OTR Growler®

Big Mouth Range

The SS Inductions’ Big Mouth® range is very affordable. It combines a larger induction and entry into the airbox resulting in a higher volume of free flowing air. You retain the factory airbox but with the extra cooler air you will feel a nice performance boost and of course use less fuel.

Airflow is captured from the front of the moving car and is rammed between the bonnet and cross-member directly into the induction opening. Most Big Mouth® kits include one or more of our unique aluminium air deflectors which direct extra airflow into the induction unit from the large grill area.

Installation is simple. The entry hole into the factory airbox needs to be enlarged but generally there are no other modifications needed. We recommend the addition of a Big Mouth® high performance re-washable

Growler Range

The SS Inductions’ premium Growler® range replaces the factory airbox altogether and combines our high-flow inverted pod filter with a less-restrictive streamlined unit. The square shape of the factory airbox is not conducive to high speed airflow (when do you see a square exhaust pipe?). The combination of sheer volume, a pod filter and a shorter more direct feed to the throttle body ensures significant power and torque gains. All Growler® units provide sufficient airflow for all high output modifications. You can feel and hear the difference and at highway speeds you’ll notice a big improvement in fuel economy.

Airflow is captured from behind and beneath the headlight through a huge opening in the Growler® airbox and directed through the pod filter via a shorter path to the motor. In some models the factory intake can be retained and also connected to the new airbox for greater gains.

Installation is extremely straightforward and you can accomplish the job in less than half an hour with just a few simple hand tools.
OTR Growler Range

The OTR Growler® which is designed primarily for track use is a high performance over-the-radiator induction for the Holden VE V8. It replaces the factory airbox and intake pipe altogether and provides a direct feed to the throttle body. It uses two extremely efficient inverted cone pod filters attached to our unique ‘Y Pipe’, both of which are housed in a cowling which is specially designed to capture and channel the maximum amount of cool air through the filters and into the throttle body.

The cowling and Y Pipe also acts as dual insulation to reduce intake temperatures while the design itself reduces the likelihood of water ingestion.

Note, a maf-less tune is required with this unit.

The OTR® fits directly onto a standard car with no altering of radiator mounts etc and takes less than 10 minutes to install (plus tune time). By unclipping the top cowl, the Big Mouth® filters are easily accessed for cleaning.

As well as having a very distinctive and aggressive appearance, users of this market leading induction can expect huge power and torque gains plus a great induction growl.