A1 Automotive Suspension & Exhaust has been an A1 Exhaust specialist since 2002. This allows us to have a nation wide warranty to give you peace of mind and gives us product buying power to offer you the best quality exhaust to suit your vehicle and needs at a competitive price.

Please click on the product below for more details:

Standard Exhaust Replacement

Your vehicle's exhaust system has a critical role to play in the efficient operation of your vehicle and for the safety of you and your family. The exhaust removes hot poisonous gases produced by your engine, keeping these gases away from your vehicle and its occupants, converting them into more environmentally friendly outputs. It also reduces engine noise to acceptable and legal levels, and Improves your engine's performance and fuel economy.

We have a large range of suppliers that can supply direct bolt on replacement exhaust for your vehicle to assure you of quality fitment and hassle free driving. We use quality Australian made exhausts and are able to offer a lifetime warranty. Please refer to our Lifetime Warranty section for more details. Please read our Performance Exhaust Replacement section below to see if your vehicle could benefit from a performance exhaust upgrade for more power and fuel economy.



Performance Exhaust Replacement

We have a large range of bolt on performance exhaust systems for most cars, utes and four wheel drive. These systems have been specially manufactured for maximum performance gain, superior design and with the ultimate sound and depending on your driving style improved economy. All our performance systems are mandrel bent to allow perfect flow through the bends without restriction compared to pipes bent using a normal exhaust pipe bender. All our systems have been tested to the highest standard to deliver the best quality and outcome for your vehicle.

Some of the leading brands of exhaust systems we use are Cobra Performance, Redback, Redback 4x4, Xforce, Rage, Mercury. We also have a large selection of header brands we use such as HiTech, Genie, Pacemaker, HM Headers and Redback for a totally tuned exhaust system. With this selection of leading brands we can offer you a choice of systems from mild steel, stainless steel, dual or single exhaust systems or a complete custom built system if a bolt on system is not available.







 

SS Inductions Products



We can supply the full range of SS Induction products for your vehicle. The induction systems work due to cold air being denser than warm humid air and holds more oxygen. This cooler oxygen-rich air, increases the efficiency of the combustion process creating more power and torque.

All vehicles have a factory induction however most are undersized, restrictive and poorly situated so that there is no ramming effect and your engine is left to breathe in hot turbulent air from within the engine bay. This results in sluggish responsiveness with poor performance and economy - it’s like trying to run down the road breathing through a straw in your mouth.

You drive into high-pressure air try putting your arm out the window at even 50kph. SS Inductions’ cold air systems channel that pressured air to allow the engine to breathe in a greater volume at all speeds, across the rev range. The ECU in your vehicle will detect the increased air and alter its settings accordingly. This may take up to several hundred kilometres of normal driving to fully adjust and produce the maximum effect. With the exception of the OTR Growler® no tune is required when fitting any SS Inductions’ products.

This increase in airflow not only improves power, torque and general performance but also improves fuel economy by obtaining more power from the fuel air mixture you’re burning, you in turn use less fuel when driving your car from point A to point B at highway speeds.

So why fit an SS Inductions’ system?

-Improved power

-Increased torque

-Better fuel economy

-Sharper acceleration

-Factory appearance

-Less heat soak

-High flow rate

-Re-washable filter

-Simple installation

-Smoother overall performance

-No need for an expensive tune* except OTR Growler®

Product information sheets:


VT-VX Commodore V6
VT-VX Commodore V8 5.7L
VY Commodore V6
VZ Commodore V6 & V8
VE Commodore SIDI V6
VE Commodore V8
BA Falcon Boss V8


Big Mouth Range

The SS Inductions’ Big Mouth® range is very affordable. It combines a larger induction and entry into the airbox resulting in a higher volume of free flowing air. You retain the factory airbox but with the extra cooler air you will feel a nice performance boost and of course use less fuel.

Airflow is captured from the front of the moving car and is rammed between the bonnet and cross-member directly into the induction opening. Most Big Mouth® kits include one or more of our unique aluminium air deflectors which direct extra airflow into the induction unit from the large grill area.

Installation is simple. The entry hole into the factory airbox needs to be enlarged but generally there are no other modifications needed. We recommend the addition of a Big Mouth® high performance re-washable


Growler Range

The SS Inductions’ premium Growler® range replaces the factory airbox altogether and combines our high-flow inverted pod filter with a less-restrictive streamlined unit. The square shape of the factory airbox is not conducive to high speed airflow (when do you see a square exhaust pipe?). The combination of sheer volume, a pod filter and a shorter more direct feed to the throttle body ensures significant power and torque gains. All Growler® units provide sufficient airflow for all high output modifications. You can feel and hear the difference and at highway speeds you’ll notice a big improvement in fuel economy.

Airflow is captured from behind and beneath the headlight through a huge opening in the Growler® airbox and directed through the pod filter via a shorter path to the motor. In some models the factory intake can be retained and also connected to the new airbox for greater gains.

Installation is extremely straightforward and you can accomplish the job in less than half an hour with just a few simple hand tools.

OTR Growler Range

The OTR Growler® which is designed primarily for track use is a high performance over-the-radiator induction for the Holden VE V8. It replaces the factory airbox and intake pipe altogether and provides a direct feed to the throttle body. It uses two extremely efficient inverted cone pod filters attached to our unique ‘Y Pipe’, both of which are housed in a cowling which is specially designed to capture and channel the maximum amount of cool air through the filters and into the throttle body.

The cowling and Y Pipe also acts as dual insulation to reduce intake temperatures while the design itself reduces the likelihood of water ingestion.

Note, a maf-less tune is required with this unit.

The OTR® fits directly onto a standard car with no altering of radiator mounts etc and takes less than 10 minutes to install (plus tune time). By unclipping the top cowl, the Big Mouth® filters are easily accessed for cleaning.

As well as having a very distinctive and aggressive appearance, users of this market leading induction can expect huge power and torque gains plus a great induction growl.


4x4 Performance Exhaust

Are you looking for more power, increased torque or improved fuel economy for your 4x4? Or maybe a combination of the three… well in most cases we can help you. By fitting a more open flowing mandrel bent exhaust system, you will get increased torque & power and for vehicles fitted with a turbo, you will experience more torque and power at a lower rpm range due to the free flowing exhaust allowing the turbo to spool up quicker. Redback 4x4 Exhausts Systems are a quality product, designed and manufactured in Australia by experienced 4x4 enthusiasts.

For even more power, these exhaust systems coupled with a Tunit Diesel Performance module, will bring out the most in your common rail diesel. See the Tunit Diesel Performance Chip section below:

Click your vehicle below for a data sheet on your system:


Holden
Rodeo TF - 2.8L Turbo Diesel Ute

Rodeo RA - 3.0L Turbo Diesel Ute
Ford
Territory - 4.0L Petrol
Ranger - 3.0L Turbo Diesel
Mazda
BT50 - 3.0L Turbo Diesel
Mitsubishi
Triton - 3.2L Turbo Diesel
Nissan
Navara - 2.5L Turbo Diesel Ute
Navara - 3.0L Turbo Diesel Ute
Patrol - 3.0L Turbo Diesel
Patrol - 4.2L Turbo Diesel Wagon
Patrol - 4.5L Petrol Wagon
Toyota
Hilux - 3.0L Non Turbo Diesel Ute
Land Cruiser 76 Series - 4.5L Turbo Diesel Ute
Land Cruiser 79 Series - 4.2L Turbo Diesel Ute
Land Cruiser 80 Series - 4.2L Turbo Diesel Wagon
Land Cruiser 100 Series - 4.2L Diesel Wagon
Land Cruiser 100 Series - 4.2L Turbo Diesel Wagon
Land Cruiser 100 Series - 4.5L Petrol Wagon
Land Cruiser 100 Series - 4.7L V8 Petrol Wagon
Land Cruiser 200 Series - V8 Twin Turbo Diesel Wagon
Prado - 3.0L Turbo Diesel Wagon

Redback Performance 4x4 exhaust are also available on many other vehicle. Call us today for the latest listing.








Tunit Diesel Performance Chip

The Tunit is an externally installed performance product suitable for all modern diesel engines. Tunit is designed to improve power, torque and efficiency, without compromising fuel economy. In most cases applications will achieve a 7-10% saving on fuel. It is retro-fit and will not interfere with original equipment or the manufacturers warranties. Installation is usually a swift process of less than 30 minutes. Thanks to Tunit, diesel tuning is possible to increase the performance of all modern diesel vehicles by up to 30%.

You may appreciate your diesel vehicle for its fuel economy, but you find it a little lacking in power! Or maybe you just want that bit of extra get up and go. The Tunit has the solution! This innovative and clever device provides a substantial increase in power and torque for the amateur or serious performance user.

How It Works
All Tunits are specifically designed to achieve enhanced diesel performance by modifying the fuel injection parameters and only by the careful interplay of these values and characteristics can the optimum performance of your engine be achieved. The turbo boost pressure is not directly altered (on turbo models) by the Tunit and is only increased via the natural increase in exhaust gases provided by the increased performance. The design and development of the Tunit has come about by the collaboration of some of the top minds in Europe and is the latest and most advanced device available on the market today. Tunits ongoing development programme ensures they keep up to date with the latest engine management and injection systems.

Call us today for a price for your vehicle.






Custom Exhaust Systems
Unfortunately there is not always a performance bolt on exhaust available for all vehicles including classics or vehicles that have been modified. At A1 Automotive Suspension & Exhaust, we can build a system that suits the performance and sound level that you require. The first step we take is to get the vehicle in on our 4 post hoist and one of our trained staff members will take the customer over it and discuss all the possibilities. From there we are able to quote you on your custom system and give you a time frame of how long we need the vehicle.





Lifetime Warranty
Most reputable exhaust manufacturers offer a two year warranty on their bolt on products – our exclusive Lifetime Exhaust Warranty extends this period for

the lifetime you own that vehicle. This extended warranty can be purchased

at the time of fitment or you can buy the extra cover within 3 months of this

date by contacting us on info@a1exhausts.com.au

PRODUCTS THAT CAN BE COVERED

This warranty is valid for most Australian made & some imported bolt

on exhaust products. We reserve the right to refuse cover on some

manufacturer’s products as there is considerable difference in the quality

of exhausts available in Australia. Your local A1 Exhausts store will be

pleased to advise you as to products that we will cover.

PERIOD OF COVER

This warranty is valid for the period that you own the vehicle.

The warranty is not transferable should you sell the vehicle.

Cover starts once the manufacturers product warranty finishes.

YOUR COVER

Your cover includes part(s) & labour. Should the warranted part fail we will

repair or replace it at our discretion..

EXCLUSIONS

Backfires, external damage & excessive corrosion.

Accessories such as rubbers are considered wear & tear items.

The warranty does not include any other costs you may incur. For example

the cost of returning the vehicle to us or any incidental damage caused by

the warranted part(s).

2 YEARLY EXHAUST CHECK

In order to maintain your exhaust system in perfect working order you are

required to bring it back to an A1 Exhaust store for a free exhaust check

every two years.

TERMS & CONDITIONS

You will be required to present your warranty paperwork & original purchase

invoice in the event of a claim.

Full terms & conditions are detailed on the back of your policy.




 

To contact us please phone: (07) 5524 3411
or Email : info@a1autos.com.au
Unit 1- 42 Machinery Drv
Tweed Heads South
NSW 2486